Building Automation Demo Walkthrough: Intuitive And Convenient And Intelligent Experience, Understand Basic Information

demo is something that many people who are new to this industry don’t know how to figure it out. In fact, it is just to show you step by step how the automation system works. This demonstration can make people intuitively feel that it is convenient and, uh, smart. If you don’t say anything else, you can at least know what’s good about this thing.

demo basic info

To put it simply... it is to use a model or simulate a building with a computer, and then start the automation system inside, so that everyone can see how the lighting, air conditioning, and those equipment are moved by themselves. There is usually a control screen that displays various data, such as the temperature and whether there are people in the house.

steps

1. Start the - You have to turn on the main power first, which is something like a main switch! Then wait for a second to enable the system's control host. If the screen lights up, it means it's OK.

2. Check - Find the button on the control screen to "Device Status". After clicking, you can see the names of all the devices connected to it. If the word "online" is displayed next to it, then there is no problem.

3. - Find the menu of "Lighting Control", click in and select a room, like... For example, in the living room, click the "Lighting" option-_- You can see the light slowly... The light is lit up and dimmed, and there are sliders next to it to adjust the brightness.

4. air - There is also the environment setting area, find the temperature adjustment area, set the temperature to 26 degrees, and then press OK. After a while, you will... feel that the air outlet of the air conditioner begins to increase in temperature, and the screen will also show that the real-time temperature is falling or rising.

5. - In the monitoring chart bar... you can see the camera screens at each door, and you can also see if the door is locked.

FAQ

Q: What should I do if the Internet is not good when demo? A: Generally, a backup router will be prepared at the demonstration site... It can be used after plugging in the wire, just like that small cube, very quickly!

Q: Can't understand the data and graphics on the screen? A: There will be a staff member next to you holding the instruction manual... I will show you the picture drawn above, which is the A4 paper printed booklet, which will talk about which is the temperature curve and which is the fan speed.

I personally think the demo is quite useful. After reading it, I roughly... I know what's going on with this system, which is much more clear than just listening to others saying it there! It doesn’t matter if you don’t want to buy it. You can go to the exhibition hall of that kind. It doesn’t cost anyway, right?